Quick connectors are a proven, inexpensive and above all safe system for connecting pneumatic hoses. The hose is plugged onto the basic body and clamped with a union nut. Several materials are available, such as brass, nickel-plated brass or stainless steel. The connection form can be selected as straight, bulkhead or angle.
Push-in fittings are the ideal transition for supply lines to other components in the pneumatic system. The compressed air hose is inserted into the fitting where it is firmly connected by re-hooking the clamping segment. If a connection is to be released, only the release ring must be pushed back.
Threaded fittings occur in very many designs and areas of application.
|Threaded fittings||Double nipple, reduction nipple, bulkhead nipple, nuts, sleeves, screw plugs, hose nozzles||Brass, brass nickel-plated|
|Threaded fittings||Double nipples, reduction nipples, sleeves, screw plugs, hose nozzles||Stainless steel|
|Fittings||Elbows, T-pieces, Y-pieces, cross pieces||Brass, nickel-plated brass, stainless steel|
|Distributor||T-distributor, 2-way distributor, 3-way distributor, 3-way/8-way/9-way block distributor,|
Distribution strips, wall brackets, wall distributors, end distributor wall plates, through distributor wall plates
|Brass, aluminium, polyamide|