Skip to content

Service

Compressed air efficiency

Reduce your compressed air costs for the long term – through professional analysis and targeted optimisation.

Did you
know?

Compressed air is one of the most expensive forms of energy in industry

  • 10%

    of industrial electricity costs are attributable to compressed air

  • 30%

    of compressed air is lost through leaks on average

  • 94%

    of the energy input is converted into heat

  • 2 years

    typical payback period for efficiency measures

Services

Our
efficiency services

Systematic analysis and optimisation for lasting cost reduction.

  • Consumption measurement

    Precise measurement of actual compressed air consumption to establish the demand profile.

  • Leak detection

    Ultrasound-based detection of all leaks in the compressed air network, with cost assessment.

  • Energy analysis

    Determination of the specific power and identification of savings potential.

  • Optimisation report

    Detailed report with recommended measures and ROI calculation.

Savings potential

Where you
can save money

Most compressed air systems hold considerable untapped savings potential. Targeted measures can often reduce compressed air costs by 20–30%.

Request efficiency consulting
  • Leak elimination

    20–30%

    By detecting and sealing leaks

  • Pressure level optimisation

    6–8%

    Approx. 6% savings per 1 bar of pressure reduction

  • Control optimisation

    10–25%

    With modern compressor control

  • Heat recovery

    70–94%

    Input energy recoverable as heat

Our
approach

From analysis to optimisation

  1. Current-state analysis

    Assessment of the current situation, determination of demand and installation of the measuring equipment.

  2. Measurement

    Data collection over a representative period (typically 1–2 weeks).

  3. Evaluation

    Detailed analysis of the measurement data and identification of weak points.

  4. Consultation

    Presentation of the results with specific recommendations for action.

  5. Implementation

    Support in implementing the recommended measures.

Case study

From practice:
a compressed air audit

A packaging manufacturer with six compressors in two stations: the power of the station was recorded and evaluated over just over two weeks. We have anonymised and redrawn the key results.

  1. Measurement

    Power of all compressors per measuring day in kW. Even at the weekend, the station ran at 381 to 508 kW.

    0200400600 521 Tue 447 Wed 505 Thu 465 Fri 508 Sat 381 Sun 500 Mon kW
  2. Evaluation

    Extrapolated, this amounts to around 4.07 million kWh of electricity per year for compressed air – a good quarter of it at weekends.

    Mon–Fri 2,985,266 kWh Sat–Sun 1,088,085 kWh
  3. Measures

    Savings potential per year by area of action. Eliminating leaks offers the biggest lever.

    Eliminate leaks 733,203 kWh Optimise station control 122,200 kWh Compressed air use at machines 122,200 kWh Raise staff awareness 40,733 kWh
  4. Savings

    Taken together, the savings potential amounts to around a quarter of the electricity used for compressed air.

    kWh of electricity could be saved per year
    1.02 million
    of the electricity used for compressed air
    approx. 25%
    per year – at the electricity price of 7 ct/kWh at the time
    €71,283

Anonymised example from an initial compressed air audit. Potentials are minimum values from the audit; the costs are based on the electricity price assumed at the time.

Leak detection –
the fastest route to savings

Leaks are the most common cause of wasted energy in compressed air systems. Using modern ultrasound technology, we precisely locate every leak in your system.

Example calculation: 3 mm leak at 6 bar

Air loss:
approx. 9 l/s
Power loss:
approx. 1.5 kW
Annual operating hours:
6,000 h
Electricity price:
€0.25/kWh
Annual costs:
approx. €2,250

A single 3 mm leak costs you more than €2,000 a year. Most systems have dozens of such leaks!

Druckluftzentrum Dortmund

Service that thinks ahead.
Technology that works.

+49 231 999 835 00 info@ddz-do.com

24/7 emergency service: 0800 10 11 821 (free of charge within Germany)

Go to the contact form