Skip to content

Technology

Piping / installation

Pressed or welded – we pipe your compressed air network from the compressor to the point of use.

Distributing compressed air
optimally

The best compressed air generation is of little use if distribution is inefficient. Up to 30% of compressed air can be lost through leaks and pressure drops in outdated piping systems.

With modern aluminium or stainless steel piping systems, you minimise losses, cut energy costs and increase the reliability of your compressed air supply.

  • Energy efficiency

    Minimal pressure drops thanks to optimised pipe routing and modern materials.

  • Leak-free

    Modern push-fit systems and high-quality materials prevent compressed air losses.

  • Flexibility

    Easy expansion and adaptation of the compressed air distribution to new requirements.

  • Quick installation

    Press and push-fit connections allow fast installation without welding work.

Press systems

Secure
press connections

For compressed air lines, we rely on the proven Sanpress press system from Viega and on AIRnet from Atlas Copco.

Press connections are quick to install and require no welding or open flame.

  • Viega Sanpress

    Proven press fittings for metal pipework – quick to install and reliably leak-tight.

    Pressed compressed air pipework with ball valves installed by DDZ
  • AIRnet from Atlas Copco

    The modular piping system from Atlas Copco: lightweight, corrosion-resistant and expandable at any time.

    Compressed air installation with blue AIRnet pipes from Atlas Copco

15 – 108 mm

Viega Sanpress from 15 to 108 mm, AIRnet from 20 mm

From the connection line at the machine to the main line running through the hall – we use press fittings on pipes from 15 to 108 mm in diameter, and with AIRnet we install lines from 20 mm upwards.

Video without sound.

In practice

Fittings in all sizes from stock
Galvanised press-fit pipes with red ball valves at two compressed air filters
Press-fit connections with shut-off valves
Galvanised, pressed compressed air lines with ball valves at the filters of a treatment system
Pressed lines in compressed air treatment

Stainless steel

Certified
welders

Wherever welding is required, our certified welders take care of it.

They produce clean, professional stainless steel piping – wherever the pipework has to meet special requirements for resistance and cleanliness.

All videos without sound.

1 2 3 4
  1. Compressor station
  2. Treatment
  3. Ring main
  4. Points of use
Fully piped and installed – from the compressor station to the point of use.

Products

Components for your
compressed air distribution

With the right components, pressure drops and leaks stay low – cutting your energy costs for the long term.

  • Pipe and push-in connectors for compressed air lines

    Piping systems

    Modern aluminium and stainless steel piping systems for efficient, leak-free compressed air distribution.

    • Corrosion-resistant
    • Quick installation
    • Low leakage
    • Expandable
    • Long service life
  • Quick couplings and a claw coupling in brass and stainless steel

    Quick couplings

    High-quality quick couplings and plug-in nipples for safe, fast connections.

    • Various standards (Euro, ARO, Orion)
    • Coupling and uncoupling under pressure
    • Minimal pressure drop
    • Durable seals
  • Compressed air hoses, pipes and a hose clamp

    Compressed air hoses

    Flexible compressed air hoses in various materials and sizes for every application.

    • PU hoses
    • Rubber hoses
    • Spiral hoses
    • Oil-resistant
  • Ball valves and shut-off valves

    Fittings & accessories

    Ball valves, shut-off valves, pressure regulators and other accessories for compressed air installations.

    • Ball valves
    • Pressure regulators
    • Air service units
    • Manifold blocks

Did you
know?

Compressed air is one of the most expensive forms of energy in industry. Around 10% of industrial electricity costs are attributable to compressed air generation.

A 3 mm leak at 6 bar causes losses of more than €2,000 per year. Professional leak detection and a modern distribution system can deliver considerable savings.

Request leak detection

Typical pressure drops

Outdated steel pipes
up to 0.5 bar
Worn couplings
up to 0.3 bar
Undersized pipe cross-sections
up to 0.4 bar
Modern aluminium system
< 0.1 bar

Druckluftzentrum Dortmund

Service that thinks ahead.
Technology that works.

+49 231 999 835 00 info@ddz-do.com

24/7 emergency service: 0800 10 11 821 (free of charge within Germany)

Go to the contact form