Skip to content

Technology

Nitrogen generators

Generate nitrogen directly from compressed air – independently, economically and sized precisely to your needs.

Generate your own nitrogen
instead of having it delivered

The air you compress every day consists largely of nitrogen. With a nitrogen generator, you separate it from the compressed air directly on site – at the purity and in the quantity your process requires.

Compared with cylinder bundles or tanks, this is as a rule considerably more energy-efficient and cheaper. How quickly the switch pays off for you depends on consumption, purity and the electricity price – and that is exactly what we clarify with an on-site measurement.

  • Our own nitrogen measurement
  • Membrane & PSA systems
  • Everything from a single source
Nitrogen generators from Atlas Copco in PSA and membrane design

Comparison

Cylinder or tank –
or on-site generation?

Criterion Cylinder bundle / tank On-site nitrogen
Costs Gas price, cylinder or tank rental, transport and evaporation losses Essentially just the energy for the compressed air and maintenance
Availability Dependent on delivery dates and fill level Around the clock, in exactly the quantity required
Effort Ordering, changing cylinders, coordinating deliveries Runs automatically in the background
Space Storage space for cylinder bundles or a tank Compact generator, easy to integrate into existing compressed air systems
Safety Handling high-pressure cylinders on site No handling of cylinders
Environment Regular lorry deliveries No deliveries required

Technologies

Membrane or PSA –
matched to your purity requirements

Which process is right depends above all on the required purity and the delivery volume. For new systems, as an authorised distributor we rely on nitrogen generators from Atlas Copco.

Membrane

Compressed air flows through bundles of fine hollow fibres. Oxygen and water vapour permeate the fibre walls faster than nitrogen – what remains at the end is nitrogen. The principle is simple, robust and requires almost no moving parts.

  • Simple, robust design
  • Low maintenance requirements
  • Ideal for medium purities

PSA

In pressure swing adsorption (PSA), two vessels filled with carbon molecular sieve operate alternately: under pressure, the oxygen is adsorbed while nitrogen flows through. The sieve is then depressurised and regenerated.

  • Very high purities possible
  • Efficient for large volumes
  • Continuous supply

From A to Z

Measure first,
then size

A nitrogen system is only as good as its sizing. That is why we carry out our own nitrogen measurements and size your system on the basis of real consumption data – and then take care of everything else.

  1. Measurement

    With our own nitrogen measurement, we record consumption, pressure and required purity directly at your site.

  2. Sizing

    Based on the measured values, we choose the technology and size – not too small and not unnecessarily large.

  3. Delivery & installation

    We deliver, pipe and commission the system – including the compressor and compressed air treatment.

  4. Service

    Maintenance, repair and 24/7 emergency service: we remain your point of contact for the entire service life.

Nitrogen generator with compressed air supply in a plant room
Complete nitrogen generation package with compressor, treatment, vessels and booster compressor

Complete solution

Everything from
a single source

We match the compressor, compressed air treatment, vessels and nitrogen generator to one another as a complete system. On request, also as a pre-assembled package – and with a booster compressor even for higher pressures or for filling your own cylinders.

Already have a compressed air system? Then we integrate the generator into your existing station.

Request a nitrogen measurement

Applications

Where nitrogen
is needed

Whether packaging, laser cutting or fire protection: generating your own nitrogen saves cylinder rental and delivery costs and gives you nitrogen in the purity you need at all times.

  • Food packaging
  • Beverages & bottling
  • Laser cutting
  • Plastic injection moulding
  • Electronics manufacturing
  • Pharmaceuticals
  • Chemicals
  • Metal heat treatment
  • Fire protection
Our in-house 3D plan of a nitrogen generator system

Druckluftzentrum Dortmund

Service that thinks ahead.
Technology that works.

+49 231 999 835 00 info@ddz-do.com

24/7 emergency service: 0800 10 11 821 (free of charge within Germany)

Go to the contact form